Formation mechanisms and degradation methods of polycyclic aromatic hydrocarbons in biochar: A review.

Biochar has been widely used in soil amendment and environmental remediation. Polycyclic aromatic hydrocarbons (PAHs) could be produced in preparation of biochar, which may pose potential risks to the environment and human health. At present, most studies focus on the ecotoxicity potential of biochar, while there are few systematic reviews on the formation mechanisms and mitigation strategies of PAHs in biochar. Therefore, a systematical understanding of the distribution, formation mechanisms, risk assessment, and degradation approaches of PAHs in biochar is highly needed. In this paper, the distribution and content of the total and bioavailable PAHs in biochar are reviewed. Then the formation mechanisms, influencing factors, and potential risk assessment of PAHs in biochar are systematically explored. After that, the effective strategies to alleviate PAHs in biochar are summarized. Finally, suggestions and perspectives for future studies are proposed. This review provides a guide for reducing the formation of biochar-associated PAHs and their toxicity, which is beneficial for the development and large-scale safe use of environmentally friendly biochar.

A Critical Review of the Effectiveness of Biochar Coupled with Arbuscular Mycorrhizal Fungi in Soil Cadmium Immobilization.

Cadmium-contaminated soil significantly threatens global food security and human health. This scenario gives rise to significant worries regarding widespread environmental pollution. Biochar and arbuscular mycorrhizal fungi (AMF) can effectively immobilize cadmium in the soil in an environmentally friendly way. Existing studies have separately focused on the feasibility of each in remediating polluted soil. However, their association during the remediation of cadmium-polluted soils remains unclear. This review paper aims to elucidate the potential of biochar, in conjunction with AMF, as a strategy to remediate soil contaminated with cadmium. This paper comprehensively analyzes the current understanding of the processes in cadmium immobilization in the soil environment by examining the synergistic interactions between biochar and AMF. Key factors influencing the efficacy of this approach, such as biochar properties, AMF species, and soil conditions, are discussed. The influences of biochar-AMF interactions on plant growth, nutrient uptake, and overall ecosystem health in cadmium-contaminated environments are highlighted. This review indicates that combining biochar and AMF can improve cadmium immobilization. The presence of AMF in the soil can create numerous binding sites on biochar for cadmium ions, effectively immobilizing them in the soil. Insights from this review contribute to a deeper understanding of sustainable and eco-friendly approaches to remediate cadmium-contaminated soils, offering potential applications in agriculture and environmental management.

Biochar supported nanoscale zerovalent iron-calcium alginate composite for simultaneous removal of Mn(II) and Cr(VI) from wastewater: Sorption performance and mechanisms.

Heavy metal pollution in water caused by industrial activities has become a global environmental issue. Among them, manganese mining and smelting activities have caused the combined pollution of Cr(VI) and Mn(II) in water, posing a serious ecotoxicological risk to ecological environments and human health. To efficiently remove Cr(VI) and Mn(II) from wastewater, a novel biochar supported nanoscale zerovalent iron-calcium alginate composite (CA/nZVI/RSBC) was synthesized by liquid-phase reduction and calcium alginate embedding methods. The adsorption performance and mechanisms of Cr(VI) and Mn(II) by CA/nZVI/RSBC were investigated. The maximum adsorption capacities of Cr(VI) and Mn(II) onto CA/nZVI/RSBC fitted by the Langmuir model were 5.38 and 39.78 mg/g, respectively, which were much higher than the pristine biochar. The iron release from CA/nZVI/RSBC was comparatively lower than that of nZVI/RSBC. Mn(II) presence enhanced the reduction of Cr(VI) by CA/nZVI/RSBC. The results of XRD, XPS, and site energy distribution analysis indicated that redox was the predominant mechanism of Cr(VI) adsorption, while electrostatic attraction dominated Mn(II) adsorption. This study provides a novel alternative way for the simultaneous removal of Cr(VI) and Mn(II) in wastewater.

Response of soil N2O production pathways to biochar amendment and its isotope discrimination methods.

Reducing nitrous oxide (N2O) emission from farmland is crucial for alleviating global warming since agriculture is an important contributor of atmospheric N2O. Returning biochar to agricultural fields is an important measure to mitigate soil N2O emissions. Accurately quantifying the effect of biochar on the process of N2O production and its driving factors is critical for achieving N2O emission mitigation. Recently, stable isotope techniques such as isotope labeling, natural abundance, and site preference (SP) value, have been widely used to distinguish N2O production pathways. However, the different isotope methods have certain limitations in distinguishing N2O production in biochar-amended soils where it is difficult to identify the relative contribution of individual pathways for N2O production. This paper systematically reviews the pathways of soil N2O production (nitrification, nitrifier denitrification, bacterial denitrification, fungal denitrification, coupled nitrification-denitrification, dissimilatory nitrate reduction to ammonium and abiotic processes) and their response mechanism to the addition of biochar, as well as the development history and advantages of isotopes in differentiating N2O production pathways in biochar-amended soils. Moreover, the limitations of current research methods and future research directions are proposed. These results will help resolve how biochar affects different processes that lead to soil N2O generation and provide a scientific basis for sustainable agricultural carbon sequestration and the fulfilment of carbon neutrality goals.

A bibliometric review of biochar for soil carbon sequestration and mitigation from 2001 to 2020.

To mitigate global warming and the greenhouse effect, biochar (BC) has been regarded as an important way of carbon sink. Therefore, this research explored the development trend of BC for soil carbon sequestration and mitigation from 2001 to 2020 based on bibliometric analysis. The results show that Yong Sik Ok and Johannes Lehmann are the top 2 high-impact authors. China, America, and Germany are the most widely collaborated countries, but China's research impact is lower than that of America. The Chinese Academy of Sciences has far more publications than any other institution, but Cornell University and Kangwon National University lead the way in terms of impact. Research hotspots can be divided into five clusters: (1) pyrolysis, nutrient, and microbial communities; (2) the immobilization of heavy metals; (3) crop yield and soil properties; (4) greenhouse gas, meta-analysis, and field experiment; (5) carbon fraction and sequestration. Reviews account for 60 % of the top 10 most highly cited papers, and eight of the top 10 focus on the early research period, setting the stage for the development of the BC field. Science of the Total Environment has the highest number of publications and total citations, and literature published in Soil Biology and Biochemistry is to some extent more likely to be cited. In the future, we need to carry out research in the following aspects: (1) Interaction mechanisms between BC, soil, and soil microbial communities. (2) Designing low-cost, high-yield, and high-effect optimization methods to improve the characteristics of BC. (3) Effect of BC on the environment and human health in long-term localization experiments. (4) Carbon sinks of BC need to be further evaluated on a global scale.

Enhanced removal of sulfonamide antibiotics from water by phosphogypsum modified biochar composite.

Antibiotic pollution has become a global eco-environmental issue. To reduce sulfonamide antibiotics in water and improve resource utilization of solid wastes, phosphogypsum modified biochar composite (PMBC) was prepared via facile one-step from distillers grains, wood chips, and phosphogypsum. The physicochemical properties of PMBC were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), Zeta potential, X-ray diffraction (XRD), etc. The influencing factors, adsorption behaviors, and mechanisms of sulfadiazine (SD) and sulfamethazine (SMT) onto PMBC were studied by batch and fixed bed column adsorption experiments. The results showed that the removal rates of SD and SMT increased with the increase of phosphogypsum proportion, while decreased with the increase of solution pH. The maximum adsorption capacities of modified distillers grain and wood chips biochars for SD were 2.98 and 4.18 mg/g, and for SMT were 4.40 and 8.91 mg/g, respectively, which was 9.0-22.3 times that of pristine biochar. Fixed bed column results demonstrated that PMBC had good adsorption capacities for SD and SMT. When the solution flow rate was 2.0 mL/min and the dosage of PMBC was 5.0 g, the removal rates of SD and SMT by modified wood chips biochar were both higher than 50% in 4 hr. The main mechanisms of SD and SMT removal by PMBC are hydrogen bonding, π-π donor-acceptor, electrostatic interaction, and hydrophobic interaction. This study provides an effective method for the removal of antibiotics in water and the resource utilization of phosphogypsum.

Engineered biochar effects on soil physicochemical properties and biota communities: A critical review.

Biochar can be effectively used in soil amendment, environmental remediation as well as carbon sequestration. However, some inherent characteristics of pristine biochars (PBCs) may limit their environmental applications. To improve the physicochemical properties of PBCs and their effects on soil amendment and pollution remediation, appropriate modification methods are needed. Engineered biochars (EBCs) inevitably have a series of effects on soil physicochemical properties and soil biota after being applied to the soil. Currently, most studies focus on the effects of PBCs on soil physicochemical properties and their amendment and remediation effects, while relatively limited studies are available on the impacts of EBCs on soil properties and biota communities. Due to the differences of biochars modified by various methods on soil physicochemical properties and biota communities, the impact mechanisms are different. For a better understanding of the recent advances in the effects of EBCs on soil physicochemical properties and biota communities, a systematic review is highly needed. In this review, the development of EBCs is firstly introduced, and the effects of EBCs on soil physicochemical properties and biota communities are then systematically explored. Finally, the suggestions and perspectives for future research on EBCs are put forward.

Environmental behaviors and degradation methods of microplastics in different environmental media.

Microplastics, as a group of emerging contaminants, are widely present in environmental media and have the potential to endanger the ecological environment and human health. Due to the inconsistencies and difficulties inherent in the analysis of microplastic particles, global monitoring data on the distribution of microplastics in the environment are still far from sufficient. The fate and migration of microplastics in the environment are also uncertain. Therefore, there have been increasing reviews on the distribution, biological effects, migration, and health risks of microplastics. However, reports focusing on the degradation of microplastics are still rare. Understanding and commanding the environmental behavior of microplastics are of great significance to explore the treatment of microplastic pollution. Although some preliminary studies on microplastics have been carried out, there is still an urgent need to conduct a comprehensive study on environmental behaviors and degradation methods of microplastics in different environmental media. This article summarizes the recent advances on microplastics, basically includes the distribution and ecological impact of microplastics in soil and water environments, then elaborates the migration behavior and influencing factors of microplastics, and focuses on the research progress of microplastics degradation methods. On this basis, the problems existing in the current research and the future development directions have been proposed. This review could provide a more systematic reference for the development and research of microplastics in the future.

Insights into Cr(VI) removal mechanism in water by facile one-step pyrolysis prepared coal gangue-biochar composite.

The acceleration of industrialization has increased the discharge of chromium-containing wastewater, posing serious threat to the eco-environment and human health. To remove Cr(VI) in wastewater and improve resource utilization of solid waste, coal gangue and rape straw were initially used to prepare coal gangue-rape straw biochar (CG-RS) composite. The effects of pyrolysis temperatures, solution pH, coexisting ions of Cr(VI) adsorption were investigated. Different adsorption models combined with site energy analysis were used to explore the adsorption behaviors and mechanisms. The results showed higher pyrolysis temperature (600 °C) prepared CG-RS had a larger adsorption capacity (9.2 mg/g) for Cr(VI) (pH = 5.0). Analysis of XPS indicated that CG-RS successfully loaded with Fe-O and Al-O functional groups, which mainly participated in the reduction of Cr(VI). Site energy analysis further proved that reduction and surface complexation were the main adsorption mechanisms. This study shows an effective removal of Cr(VI) by CG-RS, providing a new way for resource utilization of solid waste.

Fabrication and environmental applications of metal-containing solid waste/biochar composites: A review.

The resource utilization of industrial solid waste has become a hot issue worldwide. Composites of biochar with metal-containing solid wastes (MCSWs) can not only improve the adsorption performance, but also reduce the cost of modification and promote the recycling of waste resources. Thus, the synthesis and applications of biochar composites modified by MCSWs have been attracting increasing attention. However, different MCSWs may result in metal-containing solid waste/biochar composites (MCSW-BCs) with various physicochemical properties and adsorption performance, causing distinct adsorption mechanisms and applications. Although a lot of researches have been carried out, it is still in infancy. In particular, the explanation on the adsorption mechanisms and influencing factors of pollutant onto MCSW-BCs are not comprehensive and clear enough. Therefore, a systematic review on fabrication and potential environmental applications of different MCSW-BCs is highly needed. Here we summarize the recent advances on the utilization of typical metal-containing solid wastes, preparation of MCSW-BCs, adsorption mechanisms and influencing factors of pollutants by MCSW-BCs as well as their environmental applications. Finally, comments and perspectives for future studies are proposed.

Concentrations, Distribution, and Pollution Assessment of Metals in River Sediments in China.

This study conducted a review on the concentrations, spatial distribution and pollution assessment of metals including As, Hg, Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn in 102 river sediments in China between January 2008 and July 2020 based on the online literature. The geo-accumulation index (Igeo) and potential ecological risk index (RI) were used for the pollution assessment of the metals. The results showed that the ranges of metals were: 0.44 to 250.73 mg/kg for As, 0.02 to 8.67 mg/kg for Hg, 0.06 to 40 mg/kg for Cd, 0.81 to 251.58 mg/kg for Co, 4.69 to 460 mg/kg for Cr, 2.13 to 520.42 mg/kg for Cu, 39.76 to 1884 mg/kg for Mn, 1.91 to 203.11 mg/kg for Ni, 1.44 to 1434.25 mg/kg for Pb and 12.76 to 1737.35 mg/kg for Zn, respectively. The median values of these metals were descending in the order: Mn > Zn > Cr > Cu > Pb > Ni > Co > As > Cd > Hg. Compared with the SQGs, As and Cr manifested higher exceeding sites among the metals. Metals of river sediments manifested a significant spatial variation among different regions, which might be attributed to the natural weathering and anthropogenic activity. The mean Igeo values of the metals presented the decreasing trends in the order: Cd > Hg > Zn > Cu > As > Pb > Ni > Co > Cr > Mn. Cd and Hg manifested higher proportions of contaminated sites and contributed most to the RI, which should be listed as priority control of pollutants. Southwest River Basin, Liaohe River Basin, and Huaihe River Basin manifested higher ecological risks than other basins. The study could provide a comprehensive understanding of metals pollution in river sediments in China, and a reference of the control of pollutant discharge in the river basins for the management.

Underrated primary biogenic origin and lifetime of atmospheric formic and acetic acid.

Formic and acetic acids are ubiquitous in the troposphere, playing an important role in the atmospheric chemistry. Recent model studies ended up with substantial low bias on their tropospheric budgets presumably due to a large missing biogenic source derived most likely from photochemical oxidation of long-lived volatile organic compound(s), i.e., a secondary biogenic emission. Here, by studying the stable carbon isotope composition of formic and acetic acid in couple in the troposphere and relevant sources, we find the gap relates to primary biogenic emission and atmospheric lifetime of the acids. We show the primary biogenic emission is only second to the secondary biogenic emission as a strong source. Marine emission is the least one yet present in all the tropospheric environments except some local air. Long-distance transport of this origin indicates the lifetime over 5 days for both acids. Our results indicate that recent simulations underrated both primary biogenic emission and the lifetime. These underestimations would inevitably bias low the modeled results, especially in the low and free troposphere where primary biogenic emission and lifetime has the most pronounced influence, respectively.

Formation and mechanisms of nano-metal oxide-biochar composites for pollutants removal: A review.

Biochar, a carbon-rich material, has been widely used to adsorb a range of pollutants because of its low cost, large specific surface area (SSA), and high ion exchange capacity. The adsorption capacity of biochar, however, is limited by its small porosity and low content of surface functional groups. Nano-metal oxides have a large SSA and high surface energy but tend to aggregate and passivate because of their fine-grained nature. In combining the positive qualities of both biochar and nano-metal oxides, nano-metal oxide-biochar composites (NMOBCs) have emerged as a group of effective and novel adsorbents. NMOBCs improve the dispersity and stability of nano-metal oxides, rich in adsorption sites and surface functional groups, maximize the adsorption capacity of biochar and nano-metal oxides respectively. Since the adsorption capacity and mechanisms of NMOBCs vary greatly amongst different preparations and application conditions, there is a need for a review of NMOBCs. Herein we firstly summarize the recent methods of preparing NMOBCs, the factors influencing their efficacy in the removal of several pollutants, mechanisms underlying the adsorption of different pollutants, and their potential applications for pollution control. Recommendations and suggestions for future studies on NMOBCs are also proposed.

Adsorption of emerging contaminants from water and wastewater by modified biochar: A review.

Emerging contaminants (ECs), a group of relatively low-concentration but high-toxicity pollutants in the environment, have attracted widespread attention in recent years. These trace pollutants can be enriched in organisms and finally transferred to human bodies, posing a potential hazard to public health. Biochar, a low-cost and high-efficiency adsorbent, has been used to treat ECs in water. However, due to certain limitations of pristine biochar, such as poor adsorption capacity, narrow adsorption range, and other shortcomings, it is necessary to modify biochar to improve its applications in water treatment for ECs. Currently, there are a lot of reports on the removal of ECs from water by modified biochar. These studies explored different modification methods to functionalize biochar with various physicochemical properties, which resulted in distinct adsorption effects, behaviors and mechanisms of modified biochar on different ECs. There is a need to systematically review and digest the knowledge on the adsorption of ECs on modified biochar. In this review, recent biochar modification methods used in ECs removal are firstly summarized, and the adsorption performance and mechanisms of modified biochar on typical ECs are then systematically reviewed. Finally, the main research directions and trends, as well as recommendations and suggestions for future development are pointed out.

Environmental-friendly coal gangue-biochar composites reclaiming phosphate from water as a slow-release fertilizer.

To solve the problem of limited adsorption efficiency of pristine biochar for phosphate, a novel biochar composite was prepared from different feedstocks and coal gangue by one facile-step pyrolysis method. The effects of pyrolysis temperature, adsorbent dosage, pH of the solution, and coexisting ions on phosphate adsorption were analyzed. The adsorption performance and mechanism of phosphate in water were investigated. The application of the phosphorus-laden (P-laden) composite as slow-release fertilizer was evaluated by a germination test. The results showed that the maximum phosphate adsorption capacity of coal gangue modified oilseed rape straw biochar prepared at 700 °C (CG-OR700) was 7.9 mg/g at pH 4.0, which is 4.6 times that of pristine biochar. The adsorption process can be well fitted by the pseudo-second-order kinetic and Langmuir isotherm adsorption model. The mechanism of phosphate adsorption mainly includes surface precipitation, ligand exchange, and electrostatic attraction. The P-laden biochar can be used as a slow-release fertilizer to promote seed germination and growth. This study shows that the coal gangue modified biochar composite can not only be used to remove phosphate from wastewater, but also be used as a slow-release fertilizer, providing a new way for the phosphorus recovery and resource utilization of solid wastes.

Phosphogypsum as a novel modifier for distillers grains biochar removal of phosphate from water.

A novel biochar composite was fabricated via the pyrolysis of distillers grains treated phosphogypsum for phosphate removal from water. Batch adsorption experiments were performed on the adsorption characteristics of phosphate. Effects of pyrolysis temperature, solution pH, the dosage of adsorbent, ambient temperature on phosphate adsorption were also investigated. The results demonstrated that the optimum initial solution pH for phosphate adsorption was 6.0, and high pyrolysis temperature was favorable for phosphate adsorption. The optimal dosage of biochar was 1.25 g L-1. A pseudo-second-order kinetic model can well explain the adsorption kinetics, indicative of the energetically heterogeneous solid surface of the composite. The maximum phosphate adsorption capacity of the phosphogypsum modified biochar obtained from Langmuir isotherm reached 102.4 mg g-1 which was almost five times that of distillers grains biochar alone (21.5 mg g-1). The mechanism is mainly attributed to electrostatic adsorption, surface precipitation and ligand exchange. The ideal adsorption performance indicated that biochar supported phosphogypsum can be used as high-quality adsorbent for phosphate removal in wastewater treatment.

Enhanced removal of hexavalent chromium by engineered biochar composite fabricated from phosphogypsum and distillers grains.

Two kinds of industrial wastes (distillers grains and phosphogypsum) were used as raw materials to produce a new biochar composite for Cr(VI) removal in water. The influencing factors including pyrolysis temperature, dosage, initial solution pH as well as contacting time were explored. The adsorption kinetics, isotherms, and thermodynamics of two biochars were conducted. The results show that the adsorption of Cr(VI) by biochar is related to pH. The ideal pH was 3.0 and the adsorbed Cr(VI) decreases as the pH increases. The Cr(VI) adsorption process conformed to the pseudo-second-order equation. Phosphogypsum modified (PM)-biochar is well described by the Freundlich model. The maximum adsorption capacities of distillers grains (DG)-biochar and PM-biochar on Cr(VI) were 63.1 and 157.9 mg g-1, respectively. The thermodynamic analysis indicates that the Cr(VI) adsorption occurs spontaneously which is an endothermic process. This study provided an alternative way for Cr(VI) removal from water.

Sorption and desorption of Pb(II) to biochar as affected by oxidation and pH.

The use of biochar for the removal of heavy metals from water has environmental benefits. In order to elucidate the potential application of highly functionalized biochar for the removal of Pb(II) in aqueous solution, maple wood biochar was oxidized using hydrogen peroxide. The pH values of oxidized biochar ranged from 8.1 to 3.7, with one set being adjusted to a pH of 7 as a comparison. It was found that oxidizing the biochars increased their Pb(II) adsorption capacity if the pH remained below 6 (strong oxidation), but decreased their Pb(II) adsorption ability above pH6 (weak oxidation). After adjusting the pH of oxidized biochar to pH7, the Pb(II) adsorption capacity further increased two to sixfold for oxidized biochars originally at pH3.7-6. The adsorption characteristics of Pb(II) were well described by the Langmuir equation. Adsorption of Pb(II) was not fully reversible in water. Less than 6% of Pb(II) desorbed in water in two consecutive steps than was previously adsorbed, for biochars with a pH below 7, irrespective of oxidation. Recovery using an extraction with 0.1M NaNO3 increased from 0.7% to 32.7% of Pb(II) undesorbed by both preceding water extractions with increasing oxidation, for biochars with a pH below 7. Unextractable Pb(II) was lower at low oxidation but increased to 99.0% of initially adsorbed amounts at low pH, which indicated that the adsorption of Pb(II) on oxidized biochar is pH independent.

Alginate-based composites for environmental applications: A critical review.

Alginate-based composites have been extensively studied for applications in energy and environmental sectors due to their biocompatible, nontoxic, and cost-effective properties. This review is designed to provide an overview of the synthesis and application of alginate-based composites. In addition to an overview of current understanding of alginate biopolymer, gelation process, and cross-linking mechanisms, this work focuses on adsorption mechanisms and performance of different alginate-based composites for the removal of various pollutants including dyes, heavy metals, and antibiotics in water and wastewater. While encapsulation in alginate gel beads confers protective benefits to engineered nanoparticles, carbonaceous materials, cells and microbes, alginate-based composites typically exhibit enhanced adsorption performance. The physical and chemical properties of alginate-based composites determine the effectiveness under different application conditions. A series of alginate-based composites and their physicochemical and sorptive properties have been summarized. This critical review not only summarizes recent advances in alginate-based composites but also presents a perspective of future work for their environmental applications.

Effect of biochar addition on short-term N2O and CO2 emissions during repeated drying and wetting of an anthropogenic alluvial soil.

Agricultural soils are an important source of greenhouse gases (GHG). Biochar application to such soils has the potential of mitigating global anthropogenic GHG emissions. Under irrigation, the topsoils in arid regions experience repeated drying and wetting during the crop growing season. Biochar incorporation into these soils would change the soil microbial environment and hence affect GHG emissions. Little information, however, is available regarding the effect of biochar addition on carbon dioxide (CO2) and nitrous oxide (N2O) emissions from agricultural soils undergoing repeated drying and wetting. Here, we report the results of a 49-day aerobic incubation experiment, incorporating biochar into an anthropogenic alluvial soil in an arid region of Xinjiang Province, China, and measuring CO2 and N2O emissions. Under both drying-wetting and constantly moist conditions, biochar amendment significantly increased cumulative CO2 emission. At the same time, there was a significant reduction (up to ~20 %) in cumulative N2O emission, indicating that the addition of biochar to irrigated agricultural soils may effectively slow down global warming in arid regions of China.